Hydraulic Electric Control Valve

600X hydraulic electric control valve consists of main valve, solenoid guide valve, needle valve, ball valve, micro filter and pressure gauge. The remote control of valve opening and closing can be realized through the electromagnetic conductivity valve. After adding additional devices, the speed of opening and closing can be controlled.
This product uses the guide valve to control the opening and closing of the valve to save energy. It can replace other large-scale electric valves.
This series of valve products are widely used in high-rise buildings, living areas and other water supply network systems and urban water supply projects.
Working principle
When the valve feeds water from the inlet end, the water flows through the needle valve into the main valve control room. When the solenoid guide valve opens, the water in the control room flows out through the solenoid guide valve and the ball valve. Ball valve opening is greater than needle valve opening, main valve control chamber pressure is very low, main valve is in full open state.
When the solenoid guide valve closes, the water in the main valve control chamber can not flow out. The control chamber boosts pressure and pushes the diaphragm to close the main valve.
Main technical parametersMajor Parts MaterialsPart List
1. Electromagnetic Guide Valve 2, Needle Valve 3, Ball Valve 4, Main Valve
Main Connection Sizeinstallation diagram